Sawaal

 CISCO Certification Questions

Popular Latest Rated
Q:

An administrator issues the command "ping 127.0.0.1" from the command line prompt on a PC host named PC1. If an ICMP reply is received, what does this confirm?

A. The PC host PC1 has connectivity with a local host
B. The PC host PC1 has connectivity with a Layer 3 device
C. The PC host PC1 has a default gateway correctly configured
D. The PC host PC1 has connectivity up to Layer 5 of the OSI model
E. The PC host PC1 has the TCP/IP protocol stack correctly installed

Answer

Answer : E

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

11 7081
Q:

A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session?

A) Send a different source port number B) Restart the virtual circuit
C) Decrease the sequence number D) Decrease the window size
 
Answer & Explanation Answer: D) Decrease the window size

Explanation:

A receiving host can control the transmitter by using flow control ( TCP uses windowing by default). By decreasing the window size, the receiving host can slow down the transmitting host so the receiving host does  not overflow its buffers.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 7069
Q:

The router address 192.168.10.250 is the default gateway for both the Web Server 2 and Host 1. What is the correct subnet mask for this network?

A. 255.255.255.0
B. 255.255.255.192
C. 255.255.255.250
D. 255.255.255.252

Answer

Answer : A

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 7025
Q:

The network with ip address 192.168.100.0/27 is to be used on a router. If ip subnet-zero is configured, which statement describe the resulting number of available subnets and hosts?

A) 7 usable subnets, each with 32 host addresses B) 8 usable subnets, each with 30 host addresses
C) 8 usable subnets, each with 27 host addresses D) 7 usable subnets, each with 24 host addresses
 
Answer & Explanation Answer: B) 8 usable subnets, each with 30 host addresses

Explanation:

Because subnet zero is configured and we have a class C address (192.168.100.0) then the network portion will have 3 bits so 8 subnets will be available. The rest of the bits, 5, represent the available hosts, so 2^5=32, but only 30 are available, 0 ad 31 are network and broadcast respectively.

Report Error

View Answer Report Error Discuss

Filed Under: CCENT

6 6947
Q:

How many bits are in an IPv6 address field?

A) 24 B) 16
C) 32 D) 128
 
Answer & Explanation Answer: B) 16

Explanation:

There are 16 bits (four hex characters) in an IPv6 field.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 6812
Q:

To enable OSPFv3, which of the following would you use?

A) Router1 (config - if) # ipv6 ospf 10 area 0.0.0.0 B) Router1 (config - if) # ipv6 router rip 1
C) Router1 (config - if) # ipv6 router eigrp 10 D) Router1 (config - if) # ospf ipv6 10 area 0
 
Answer & Explanation Answer: A) Router1 (config - if) # ipv6 ospf 10 area 0.0.0.0

Explanation:

To enable OSPFv3, you enable the protocol at the interface level as with RIPng. The command string is ipv6 ospf proces-id area area-id.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 6801
Q:

To use VLSM, what capability must the routing protocols in use possess?

A) Support for multicast B) Multi-protocol support
C) Transmission of subnet mask information D) Support for unequal load balancing
 
Answer & Explanation Answer: C) Transmission of subnet mask information

Explanation:

To use VLSM, the routing protocols in use possess the capability to transmit subnet mask information.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 6695
Q:

Your company wants to reconfigure a Catalyst 2950. Which actions must be taken to erase the old configuration?(Choose three)

A. Erase flash
B. Restart the switch
C. Delete the VLAN database
D. Erase the startup configuration

Answer

Answer: B  C  D

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

4 6602