Sawaal

 CISCO Certification Questions

Popular Latest Rated
Q:

Which layer ensures the trustworthly transmission of data across a physical link and is primarily concerned with physical addressing, line discipline, network topology, error notification, ordered delivery of frames, and flow control?

Answer

PDUs at the data link layer are called frames and provide physical addressing, plus other options to place packets on the network medium.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2200
Q:

What are the purposes of areas in an OSPF network?

Answer

Areas allow the design of a hierarchical network. Routes can be summarized or blocked in an area to reduce the amount of routing information on internal OSPF routers.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNP

2 2181
Q:

Which commands loads a new version of the Cisco IOS into a router?

A) copy flash ftp B) copy ftp flash
C) copy flash tftp D) copy tftp flash
 
Answer & Explanation Answer: D) copy tftp flash

Explanation:

The command copy tftp flash will allow you to copy a new IOS into flash memory on your router.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 2156
Q:

What is the 127.0.0.1 address used for?

Answer

Loop back or diagnostics

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2143
Q:

Some colleagues are discussing QoS, and are interested in jitter. What is jitter?

A) Jitter refers to the variation in delay experienced by packets B) Jitter is a flickering effect sometimes seen on streaming video.
C) Jitter is a predefined settings package that provides optimal QoS for IP telephony use. D) Jitter is a clicking noise that can be heard on some VoIP calls. It is caused by loss of UDP packets.
 
Answer & Explanation Answer: A) Jitter refers to the variation in delay experienced by packets

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: CCENT

0 2137
Q:

What is the Class B private IP address space?

Answer

172.16.0.0 through 172.31.255.255

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2108
Q:

What do you use when you want to display a message to all the terminals connected to a router?

A) banner login B) banner motd
C) banner exec D) banner slip-ppp
 
Answer & Explanation Answer: B) banner motd

Explanation:

Explanation: This MOTD banner is displayed to all terminals connected and is useful for sending messages that affect all users (such as impending system shutdowns). Use the no exec-banner or no motd-banner command to disable the MOTD banner on a line. The no exec-banner command also disables the EXEC banner on the line. When a user connects to the router, the MOTD banner appears before the login prompt. After the user logs in to the router, the EXEC banner or incoming banner will be displayed, depending on the type of connection. For a reverse Telnet login, the incoming banner will be displayed. For all other connections, the router will display the EXEC banner. Connection, Menu, and System Banner Commands

Report Error

View Answer Report Error Discuss

Filed Under: CCENT

0 2097
Q:

What is the command to copy a Cisco IOS to a TFTP server?

Answer

copy flash tftp

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2096