Sawaal
  • Home/
  • Certification Questions

Certification Questions

What are certifications?

Certification is the recognition of an individual to be qualified for a job or task. These Certification programs setup IT standards and play major role in developing a qualified workforce. Certifications can raise the technical standards.

Why certifications?

One can measure his/her abilities in their respective professional knowledge and present themselves through certificates. The certification programs assure technical proficiency of IT professionals by measuring their technical skills and knowledge in a specific IT support function or technology.

Who can do certifications?

Definitely who aim for professional growth in their respective functionality or technology can plan for Certifications. This can also tell how valuable certifications are to be potential employers. Any qualified and well experienced IT professional can step-up to take the certification.

How to do certifications?

When you decided to take the certification, well done! You have stepped up the professional ladder to upgrade your skills and knowledge. You can easily plan, work hard and grab a certification. Find some help from following steps.

  • Decide your certification – explore your skills and find a certification that matches your skill set.
  • Research the certification-evaluate the process of certification. Find details of validity, qualification for certification.
  • Evaluate your experience - asses your real experience with the material you gathered for certification and come up with a plan which areas to concentrate more.
  • Apply for certification – Get registered for your Exam.
  • Plan of study – you can study your well experienced areas yourself and can take trainings if required to boost your preparation. You can practice more through mock tests you find online, can keep discussing in forums and blogs.
  • Grab Certificate – finally, you can grab a certification with your positive attitude, hard work.
Popular Latest Rated
Q:

In practical IPv6 application, The encapsulation of IPv6 packets inside IPv4 packets is called what?

A. tunneling
B. hashing
C. routing
D. NAT

Answer

Answer : A


Explanation:


Remember,  most network is still build on IPv4 structure and IPv4 is not going away in a hurry… one of the many techniques used to migrate to IPv6 is Tunneling.


Tunneling is a method that a network built on IPv4 structure can be configured to traffic IPv6 packet simultaneously.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

1 5714
Q:

If one of the host connected to Sw-AC3 wants to send message to ip 190.0.2.5 (or any ip on a different subnet) what will be the destination MAC address ?

Answer

Answer and Explanation:


Because the destination address is on a different subnet from the switch, the packet will be forwarded to its default gateway. To verify the default gateway of this switch, use the show running-config command



From the output above, we can see that its default-gateway is 192.168.1.254. Which can be said to be a layer 3 device (router); in this case, the VLAN-R1 router. You can use the show cdp neighbor detail command verify further.



From the output above, you can confirm that the switch's default gateway is VLAN-R1 router (with the IP address of 192.168.1.254).The interface FastEthernet0/3 shows that the switch is directly connected to VLAN-R1 router through the switchport Fa0/3. To verify the MAC address associated this interface is interface, you use the show mac-address-table command:



Looking closely at the table above, you will discorver that the corresponding MAC address is 000a.b7e9.8360. Although there are some entries on port Fa0/3 with different Vlans ,but they have the same MAC address.


From the output above, you can confirm that the switch's default gateway is VLAN-R1 router (with the IP address of 192.168.1.254).The interface FastEthernet0/3 shows that the switch is directly connected to VLAN-R1 router through the switchport Fa0/3. To verify the MAC address associated this interface is interface, you use the show mac-address-table command
Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

1 5666
Q:

The standard delivery clients in a R/3 system are

A. client 000 and 001

B. client 001, 000 , training client 999

C. client 000, 001 and 002

D. client 001, 000,002 and training client 999

Answer

Answer : A

Report Error

View answer Workspace Report Error Discuss

Subject: SAP FI

10 5648
Q:

What metric does RIPv2 use to find the best path to a remote network?

A) Hop count B) MTU
C) Cumulative interface delay D) Load
 
Answer & Explanation Answer: A) Hop count

Explanation:

RIPv1 and RIPv2 only use the lowest hop count to determine the best path to a remote network.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5617
Q:

What is the maximum number of triggers, can apply to a single table?

A) 8 B) 10
C) 12 D) 14
 
Answer & Explanation Answer: C) 12

Explanation:

Maximim number of triggers that can be applied to a single table is 12

Report Error

View Answer Report Error Discuss

Filed Under: Oracle Certification
Job Role: Database Administration

7 5601
Q:

Which object has to be used to avoid a change of reconciliation account in the customer's master data  ?

A) The field status of the activity B) The field status of the posting key
C) The field status group of the reconciliation account D) The field status of the customer account group d)
 
Answer & Explanation Answer: A) The field status of the activity

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: SAP FI

9 5590
Q:

The function CHECK set to the parameter ABR...

A.provides the Payroll driver with data on the type of program that the schema uses.
B.ensures that Payroll is only run for the employees in a payroll area that has been released for payroll.
C.controls whether the Payroll results are updated on the database.
D.ensures that Payroll is not run for any employee.

Answer

Answer : A , B , C

Report Error

View answer Workspace Report Error Discuss

Subject: SAP HR

4 5580
Q:

If your routing table has a static, a RIP, and an EIGRP route to the same network, which route will be used to route packets by default?

A) Any available route B) RIP route
C) Static route D) EIGRP route
 
Answer & Explanation Answer: C) Static route

Explanation:

Static routes have an administrative distance of 1 by default. Unless you change this, a static route will always be used over any other dynamically learned route. EIGRP has an administrative distance of 90, and RIP has an administrative distance of 120, by default

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

1 5510