Sawaal

 Pipes and Cistern Questions

Popular Latest Rated Important Formulae

FACTS  AND  FORMULAE  FOR  PIPES  AND  CISTERN  QUESTIONS

 

 

1. Inlet : A pipe connected with a tank or a cistern or a reservoir, that fills it, is known as an inlet.

 

2. Outlet : A pipe connected with a tank or cistern or reservoir, emptying it, is known as an outlet.

 

(i) If a pipe can fill a tank in x hours, then:

part filled in 1 hour = 1/x

(ii) If a pipe can empty a tank in y hours, then:

part emptied in 1 hour = 1/y

(iii) If a pipe can fill a tank in x hours and another pipe can empty the full tank in y hours (where y > x), then on opening both the pipes, then the net part filled in 1 hour = 1x-1y

(iv) If a pipe can fill a tank in x hours and another pipe can empty the full tank in y hours (where x > y), then on opening both the pipes,  the net part emptied in 1 hour = 1y-1x

Q:

One pipe can fill a tank  three times as fast as another pipe. If together the two pipes can fill the tank in 36 min, then the slower alone will be able to fill the tank in:

A) 81 min B) 108 min
C) 144 min D) 192 min
 
Answer & Explanation Answer: C) 144 min

Explanation:

Let the slower pipe alone fill the tank in x minutes. 

Then,faster pipe will fill it in x/3 minutes. 

=>1x+3x=136 =>4x=136 =>x=144mins

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern

22 11885
Q:

Water flows into a tank which is 200 m long and 150 m wide, through a pipe of cross-section (0.3m x 0.2m) at 20 km/h. In what time will the water level be 12m  ?

A) 200 hrs B) 240 hrs
C) 300 hrs D) 270 hrs
 
Answer & Explanation Answer: C) 300 hrs

Explanation:

Volume of water collected in the tank in 1 hour

⇒ (0.3 × 0.2 × 20km × 1000mts) = 1200 m cubic

If after t hours, the water is at height of 12m,

1200t=200×150×12 

⇒ t = 300 Hours.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: AIEEE , Bank Exams , CAT , GATE
Job Role: Bank Clerk , Bank PO

25 11654
Q:

In what time would a cistern be filled by three pipes which diameters are 2 cm, 3 cm and 4 cm running together, when the largest alone can fill it is 58 minutes? The amount of water flowing in each pipe is proportional to the square of its diameter.

A) 26 min B) 32 min
C) 36 min D) 42 min
 
Answer & Explanation Answer: B) 32 min

Explanation:

Given that the diameters of the three pipes are 2 cm, 3 cm and 4 cm

From the given data,

Amount of water from three pipes is 4 units, 9 units and 16 units.

Let the capacity of cistern be 'p' units.

∴ p/58 = 16

⇒ p = 928 units.

 

In 1 minute, quantity to be filled by 3 pipes = 29 units

∴ Total time required = 928/29 = 32 minutes.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: AIEEE , Bank Exams , CAT
Job Role: Analyst , Bank Clerk , Bank PO

11 10427
Q:

A and B can fill the tank in 60 min and 90 min. There is a leak at 3/4th of the height. If leak is opened alone, it takes 36 min to empty till 3/4th the height. Find the time taken to fill the tank if all of the taps and the leak are opened simultaneously.

A) 39 B) 27
C) 37 D) 33
 
Answer & Explanation Answer: A) 39

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: Bank Exams
Job Role: Bank PO

50 10277
Q:

Two pipes A and B can fill a tank in 15 min and 20 min respectively. Both the pipes are opened together but after 4 min, pipe A is turned off. What is the total time required to fill the tank ?

A) 15 min 20 sec. B) 16 min 40 sec.
C) 13 min 10 sec. D) 14 min 40 sec.
 
Answer & Explanation Answer: D) 14 min 40 sec.

Explanation:

Part filled in 4 minutes = 4(1/15 + 1/20) = 7/15

 

Remaining part = 1 - 7/15 = 8/15

 

Part filled by B in 1 minute = 1/20

 

1/20 : 8/15 :: 1 : k

 

k = (8/15 )x 1 x 20 = 10( 2/3) min = 10 min 40 sec.

 

The tank will be full in (4 min. + 10 min. 40 sec) = 14 min 40 sec.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: GATE , CAT , Bank Exams , AIEEE
Job Role: Bank PO , Bank Clerk

7 8935
Q:

Three taps I, J and K can fill a tank in 20,30and 40 minutes respectively. All the taps are opened simultaneously and after 5 minutes tap A was closed and then after 6 minutes tab B was closed .At the moment a leak developed which can empty the full tank in 70 minutes. What is the total time taken for the completely full ?

A) 24.315 minutes B) 26.166 minutes
C) 22.154 minutes D) 24 minutes
 
Answer & Explanation Answer: B) 26.166 minutes

Explanation:

Upto first 5 minutes I, J and K will fill => 5[(1/20)+(1/30)+(1/40)] = 65/120


For next 6 minutes, J and K will fill => 6[(1/30)+(1/40)] = 42/120


So tank filled upto first 11 minutes = (65/120) + (42/120) = 107/120
So remaining tank = 13/120


Now at the moment filling with C and leakage @ 1/60 per minute= (1/40) - (1/70) = 3/280.
So time taken to fill remaining 13/120 tank =(13/120) /(3/280) = 91/6 minutes

 

Hence total time taken to completely fill the tank = 5 + 6 + 91/6 = 26.16 minutes.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: GRE , GATE , CAT , Bank Exams , AIEEE
Job Role: Database Administration , Bank PO , Bank Clerk , Analyst

13 8757
Q:

There is an empty reservoir whose capacity is 30 litres. There is an inlet pipe which fills at 5 L/min and there is an outlet pipe which empties at 4 L/min. Both the pipes function alternately for 1 minute. Assuming that the inlet pipe is the first one to function, how much time will it take for the reservoir to be filled up to its capacity?

A) 49.5 min B) 50 min
C) 51 min D) 52 min
 
Answer & Explanation Answer: C) 51 min

Explanation:

The work to be done = Capacity of reservoir  = 30 litres.

 1st Minute ---> inlet pipe opened ---> 5 lit filled

 2nd minute ---> inlet pipe closed; outlet pipe opened ---> 4 lit emptied

 

In 2 minutes (5 litres - 4 litres = 1lit) is filled into the reservoir.

It takes 2 minutes to fill 1lit ---> it takes 50 minutes to fill 25 litres into the reservoir.  

 

In the 51st minute inlet pipe is opened and the reservoir is filled.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: CAT
Job Role: Bank PO

24 8535
Q:

Two pipes A and B can fill a tank in 16 hrs and 12 hrs respectively. The capacity of the tank is 240 liters. Both the pipes are opened simultaneously and closed after 2 hrs. How much more water need to fill the tank?

A) 70 lit B) 170 lit
C) 90 lit D) 190 lit
 
Answer & Explanation Answer: B) 170 lit

Explanation:

Given A alone can fill the tank of capacity 240 lit in 16 hrs.

=> A can fill in 1 hr = 240/16 = 15 lit

=> B alone can fill the tank of capacity 240 lit in 12 hrs.

=> B can fill in 1 hr = 240/12 = 20 lit

Now, (A + B) in 1 hr = 15 + 20 = 35 lit

But they are opened for 2 hrs

=> 2 x 35 = 70 lit rae filled

Remaining water to be filled in tank of 240 lit = 240 - 70 = 170 lit.

Report Error

View Answer Report Error Discuss

Filed Under: Pipes and Cistern
Exam Prep: AIEEE , Bank Exams , CAT , GATE
Job Role: Bank Clerk , Bank PO

20 8382