Questions

Adders are generally of five types:

1.Ripple Carry Adder:

The Ripple carry adder(RCA) consists of a building block named Half Adder(HA) which is cascaded to form a Full Adder(FA). These buildingblocks HAs and FAs are also the building blocks of all types of adders.The n full adders are cascaded to form n bit RCA.

The full adder has three input pins(input Ai,input Bi,carryin Ci) and two output pins(Sum and Ci+1).Its equations are:

Sum=Ai^Bi^Ci

Ci+1=Ai.Bi+Bi.Ci+Ai.Ci

2. Carry Lookahead Adder:

The Carry Lookahead Adder(CLA) reduces the delay as that in RCA. Let Gi=Ai.Bi, and Pi=Ai^Bi, then Ci+1=Gi+Pi.Ci.

The expressions for Sum and Ci+1 is then defined completely in terms of input pins rather wait for input carry to appear.

3. Carry Select Adder:

The carry select adder uses duplicate modules for each combination of input carry(i.e. 1 and 0).The multiplexers then select the appropriate sum and carry output according to the carry output of the preceding stages.

4. Carry Skip Adder:

The carry skip adder are as fast as carry lookahead adders which are the fastest adders but its spped decreases to about 20-30% if input operands are 64-bit or more. In these adders we divide the input bit stream into various blocks and make use of two observations:

-if each element of the two bit streams are unequal,i.e. Ai!=Bi than the carry input of the block is equal to the carry input.

-if each element of the two bit streams are equal,i.e. Ai=Bi than the carry input of the block is opposite of the carry input.

5. Carry Save Adder:

The carry save adder reduces the addition of three elements into addition of two elements,i.e. if you want sum of nine numbers it reduces it into sum of six numbers. In first step the sum of three numbers is calculated without bothering for the carry.During the second step only carry is calculated which is then added to the generated sum to give the required sum. 

Change control management is utilized from the begining to the end of the project in order to keep it focused with an emphasis on the time and budget. Answer A is incorrect because change control management is not seperate from the other phases. Answer B is incorrect because the control plan must be throughout the other phases of a project. Its usage is not optional, and consistent utilization is imperative to managing scope creep and other scope expansions. Answer C is incorrect because the project sponsors is generally not responsible for the change control documentation, although it should be involved in the buy-in and approval process.

The Jazz Singer in 1927

Windows NT uses protection mechanism called rings provides by the process to implement separation between the user mode and kernel mode.

India has 18 officially recognised languages - Konkani, Manipur and Nepali were added to the official list of 15 in 1992. The other 15 languages are Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Malayalam, Marathi, Oriya, Punjabi, Sanskrit , Tamil, Telugu , Urdu and sindhi.